Sharkoon REBEL P30 Gold ATX 3.0 Full Modular Power Supply Unit, 1300W Power, 80 PLUS Gold Efficiency, LLC + DC/DC, 135mm FDB Fan, PCIe Gen5, HQ Japanese Capacitors, Black | 4044951038541

REBEL P30 Gold1300W Designed for performance, the Rebel P30 Gold is a power supply unit that is fully modular and certified with 80 PLUS Gold. The new ATX 3.0 standard and a PCIe Gen5 12VHPWR connection offer full compatibility for high-end graphics cards. In addition, the PSU is supplied with LLC resonant converter and DC/DC technology and is equipped only with high-quality Japanese capacitors. A quiet 135 mm fan with an intelligent Zero RPM mode provides cooling and a low-noise operation.   CERTIFIED SAFETY AND EFFICIENCY: With an efficiency of at least 90 per cent at 20 per cent, 92 per cent at a 50 per cent load, and 89 per cent efficiency at a 100 per cent load, the Rebel P30 Gold is 80 PLUS Gold certified on its behalf. In addition, the power supply and user are protected by all popular protection circuits. From over-current protection to over-voltage and under-voltage protection, as well as short circuit protection, over-temperature protection and overload protection, all protection circuits are included. COOL AND CALM ANYTIME - The Rebel P30 Gold uses a quiet 135-millimeter fan with a hydrodynamic sliding bearing. Zero RPM mode can completely disable fan rotation with moderate load for quiet operation. Fan delay mode ensures the fan continues to run for up to 60 seconds after shutdown to allow efficient cooling of system hardware HIGH QUALITY IN FOCUS: The Rebel P30 Gold exclusively uses high-quality Japanese capacitors and LLC and DC/DC resonance converter technology for high reliability and performance. Through this, the Rebel P30 Gold always provides constant voltage and low interference with optimized noise and heat. MODULAR CONSTRUCTION: All cables on the Rebel P30 are modular and can be used as needed. In total, in addition to a PCIe Gen5-12VHPWR connector, 12 SATA ports and four 6+2-pin PCIe connectors, in the 1300-watt model even up to eight. Two IDE connections and a floppy connector are also available via the included adapter.     Full Support for High-End Graphics Cards The Rebel P30 Gold supports the new ATX 3.0 standard and is equipped with a modern PCIe Gen5 12VHPWR connection that is required for current high-end graphics cards and the highest performance.           Certified Safety and Efficiency As its name suggests, the Rebel P30 Gold is 80 PLUS Gold certified, providing at least 90 per cent efficiency at 20 percent load, 92 percent efficiency at 50 percent load, and an efficiency of 89 percent at 100 percent load. In addition, both the PSU and the user are safeguarded by all the common protective technology. This encompasses over-current protection, over- and under-voltage protection, short-circuit protection, over-temperature protection and over-power protection. Always Cool and Quiet A quiet 135 mm fan with a fluid dynamic bearing is used in the Rebel P30 Gold. For silent operation, the PSU's Zero RPM mode can be selected, allowing the fan rotation to be completely deactivated at moderate loads. To ensure effective cooling for the hardware, the fan delay mode lets the fan continue to run for up to 60 seconds after the PSU has been shut down.           High Quality in Focus For high degrees of reliability and performance, quality all-Japanese capacitors, LLC resonant converters and DC/DC technology are used in the Rebel P30 Gold. Thanks to this, the Rebel P30 Gold always delivers a constant and stable voltage with optimized noise and heat levels. Full-Modular Assembly All the Rebel P30's cables are modular and can be used as and when they are needed. Apart from a PCIe Gen5 12VHPWR connector, the PSU comes with a total of twelve SATA connectors and four 6+2-pin PCIe connectors. The 1,300-watt model even has up to eight 6+2-pin PCIe connectors. Two IDE connectors and a floppy connector are also available using the included adapters.       Specifications 80 PLUS Certification 80 PLUS Gold Form Factor ATX 3.0 Continuous Power 1,300 W ErP Compliant ? Technology LLC + DC/DC Japanese Primary Capacitors ? All Japanese Capacitors ? MTBF Min. 100,000 Hours Operating Temperature 0°C - 50°C Standby Power Consumption < 0.5 W Weight without Cables 1.75 kg Dimensions (L x W x H) 150 x 160 x 86 mm Housing Color Black Input   Voltage 100 - 240 VAC Frequency 50 - 60 Hz Input Current (110/230 V) 15 A / 8 A Output   12 V Rail(s) 1 Load 3.3 V 24 A Load 5 V 24 A Max. Combined Power 3.3 V + 5 V 120 W Load 12 V1 108.3 A Max. Combined Power 12 V 1,300 W Load 5 VSB 3 A Load -12 V 0.5 A 12VHPWR Load 600 W Cable and Connectors   Cable Configuration Fully Modular Flat Cables ? Maximum Cable Length 100 cm Length of Mainboard Cable 62 cm Length of CPU Cable 73 cm Length of 12VHPWR Cable 62 cm Length of PCIe Cable 55 cm + 15 cm Cable Length to First Peripheral 55 cm 20+4-Pin Mainboard Connector 1 4+4-Pin CPU Connector 1 8-Pin CPU Connector 1 6+2-Pin PCIe Connector 8 12VHPWR Connector 1 SATA Connector 12 IDE Connector 2 (via Adapter) Floppy Connector 1 (via Adapter) Fan   Fan Size 135 mm Bearing Type Fluid Dynamic Bearing Protections   OCP (Over-Current Protection) ? OVP (Over-Voltage Protection) ? UVP (Under-Voltage Protection) ? SCP (Short-Circuit Protection) ? OTP (Over-Temperature Protection) ? OPP (Over-Power Protection) ?

There are no ratings for this product yet