Thermaltake Pacific C240 Radiator, 27mm Thick High-Density Fins,Optimized Heat Dispatching, Single-Row Copper Tubes Copper Radiator, Slim Form Factor Design, Black | CL-W227-CU00BL-A
()
Size
Check
serviceability at your Pincode
Pacific C240 Radiator
The Pacific C240 Radiator is a high-performance 240mm slim copper radiator with a high-density copper fin design and brass tank. Built for 120mm high-static pressure fans, the radiator is manufactured from premium-quality materials that provide exceptional performance, and unrivalled reliability. The unique stainless steel side panels guarantee durability as well as reduce the weight of the radiator. Integrated G1/4" threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific C240 Radiator meets your cooling needs in every way.
Key Features
Fitment - engineered with a 27mm thickness radiator along with a single-row 12-set flat tube design and brass Tank for best thermal capacity
High-density copper fins - Designed to accommodate high air volume (fin per inch 14)
Reflow soldering - high-quality and high-temperature soldering at 482?/250? ensures optimal thermal transfer with full strength on all connected areas avoiding cracking and failure over time
Optimized heat Dispatching - optimized for efficiently pulling heat away from the power-dissipating components thus achieving maximum heat dissipation at both low and high airflow operation
Stainless steel side panels - engineered with stainless steel side panels that increase the durability and strength of the radiator and reduce the weight
CautionThermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup
It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Fill the reservoir to the top as it will prevent air from going into the pump
If necessary tilt the system slightly from side to side to bleed the air out of the loop.
Place some paper towels under fittings and joining points to test for leaks.
Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
Coolant might fade over time.
More Information
P/N
CL-W227-CU00BL-A
DIMENSIONS
279(L) x 119 (W) x 29.5 (H)
WEIGHT
562 g
MATERIAL
Copper
FPI (FIN PER INCH)
17
FLAT TUBE
12 set
SCREW THREAD
G¼” * 2
More Information
P/N
CL-W227-CU00BL-A
DIMENSIONS
279(L) x 119 (W) x 29.5 (H)
WEIGHT
562 g
MATERIAL
Copper
FPI (FIN PER INCH)
17
FLAT TUBE
12 set
SCREW THREAD
G¼” * 2
There are no ratings for this product yet
Model:
CL-W227-CU00BL-A
SKU:
24910
(VAT inclusive price)