Octofiber PLA 3D Filament 1.75mm – 0.75kg/Roll (Brown) | 175.pla.075.brwn.001

General Octofiber PLA is produced from pure PLA and carefully monitored pigments and is processed under the highest quality controls. This ensures a consistent product, with accurate printed objects as a result. PLA is well known for its good 3D printing properties and is suitable for many applications like household appliances, toys and decorations. Printer compatibility This 1.75mm product is compatible with most 1.75mm 3D printers. We have tested Octofiber on a variety of machines; delta printers, repraps and Felix to name a few. All with different (dual) hotends, and nozzle diameters. We are pretty sure that it will work with your machine if it looks like one listed below: - Leapfrog - Felix - Printrbot - Airwolf - Kossel - Cartesio - Wanhao - 3DBuilder - Type A - Reprap - Makerbot - Velleman Printing guidelines The values below are a safe starting point to obtain good results, but may not be optimal for your printer. for example a delta printer can achieve much higher speeds than a direct drive would. Anyways, contact us if you cannot get it working. Printer settings Printing speed30-60mm/s Bed temperature55 °C Nozzle temperature210 °C Use them as a starting point, optimal values for your specific printer may vary from the values shown above, depending on e.g. nozzle diameter, exact printing speed and layer height to name a few. Bed adhesion Many strategies are possible to get Octofiber PLA properly to your print-bed: clean glass, blue painters tape, glue stick, hairspray, special 3D printing stickers. Whichever option you choose, a heated bed is not necessary, but will further simplify good adhesion. General information Trade name Octofiber PLA Polymer name Modified Poly Lactic Acid Filament specifications Trade diameter 1.75mm  3mm Physical diameter 1.75 mm 2.85 mm Tolerance 0.05 mm 0.10 mm Material specifications Property Value Unit Test Method Physical density 1.24 g/cm³ ASTM D1505 melt mass flow rate (MFR) 6 g/10min ASTM D1238 Mechanical tensile strength MD/TD 16/21 kpsi ASTM D882 tensile modulus MD/TD 480/560 kpsi ASTM D882 elongation @ break MD/TD 160/100  % ASTM D882 Spencer impact 2.5  J Thermal melting point 135  ºC ASTM D1003 glass transition temperature 55-60 ºC ASTM D3418

There are no ratings for this product yet