GIGABYTE SATA III 2.5" 120GB Internal Solid State Drive, Sequential Read Speeds Up to 500MB/s & Write Speeds Up to 380 MB/s, 3D NAND Flash, 2M Hours MTBF, Black | GP-GSTFS31120GNTD

SPECIFICATIONS   Interface SATA 6.0Gb/s Form Factor 2.5-inch internal SSD Total Capacity 120GB Warranty Limited 3-year or 75TBW NAND NAND Flash External DDR Cache N/A Sequential Read speed up to 500 MB/s ; Minimum 350 MB/s Sequential Write speed up to 380 MB/s ; Minimum 280 MB/s Random Read IOPS Up to 50k Random Write IOPS Up to 60k Dimension (W x H x L) 69.85 x 7 x 100 mm Mean time between failure (MTBF) 2M hours Power Consumption (Active) Average: R : 2240mW; W : 2610mW Power Consumption (Idle) 170mW Temperature (Operating) 0°C to 70°C Temperature (Storage) -40°C to 85°C Note * Test system configuration: configuration may vary by models, we will choose the latest platform for verification.* Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark v.5.1.2 and I0meter 1.1.0. * Speeds based on internal testing. Actual performance may vary.* TBW (Terabyte Written):Terabytes Written" is the total amount of data that can be written into an SSD before it is likely to fail.* 1GB = 1 billion bytes. Actual useable capacity may vary.* 3 years or 75 TBW, whichever comes first. * The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.* All trademarks and logos are the properties of their respective holders.* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.